FTE

Topic Views - 2842

Resource Analyst

ANON VoicebasedServiceCentre

FTE
A Big Hello to All !

I have heard the term FTE freely used as a indication of headcount required in a team but i feel that more often then not is the FTE figure irrelevant to practical headcount requirement.

I would like someone to explain/calculate FTE in simple language / simple arithmetic. Let me give a head start by a simple example, & we can tweak the parameters once we ('I') get the basics right :-

We have a 17x7 operation.
Coverage is 06:00-23:00 HRS..open 7 days a week..only FT workers..8.5hr shifts
Calls per day = 1700 (evenly distributed as 100 per hour)
AHT = 360 secs
Shrinkage = 0 %

What is the Full Time Equivalent "FTE" for above example ?
What does this figure signify ??

Cheers !

Kex.

Healthcare Insurance

FTE
FTE = Full time equivilent.

You only have full time staff.

Therefore your FTE = The number of staff you require.

It has no bearing onnumber of calls, shrinkage etc...

It is merely the number of full time staff required. This
can be factored as Fulltime staff + Part time staff.
2*50% hours = 1FTe

DaveA

PayPal

Hi King
You'd need about 37, this is assuming a reasonable service level delivery.

You need to take into account what level of service you plan to deliver to your customers in order to come up with and FTE figure. By taking a service level (most commonly a % of calls answered in x seconds) into account this inflates the FTE requirement above that simply required to deal with the workload (1,700 x 360).

If we assume that on top of the work that needs to be done we need to have an additional 25% of resource (i.e. work forms 75% or .75 of the total requirements) then the amount of employed hours is therefore

7 x 1700 x 300 / .75 / 3600 = 1,587

If we assume that an FTE works 5 days a week, 8.5 hours perday and shrinkage is 0% then the FTE requirement is

1,587 / (5 x 8.5) = 37.3

Eamon

Resource Analyst

ANON VoicebasedServiceCentre

FTE
Hi Eamon/Dave,

Let's skip the 75-25% work load from the equation (for sake of simplicity!)
---------------------------------
I agree with calculation method :-
Weekly Workload (in secs) = 1700 calls x 7 days x 360 secs AHT = 428400 secs
Weekly Workload (in hrs) = 428400 / 3600 = 1190 hrs
Staffing avbl (in hrs) = 8.5 hrs x 5 working days per week = 42.5 hrs

FTE = 1190 / 42.5 = 28 (per week)
---------------------------------

Similarly, FTE required per day is 20 which will fulfill our hourly FTE requirement of 10 which is constant throughout the week.
---------------------------------

The problem lies in fact that neither have we considered start/end time of activity, nor have we considered shift start/end times. That is where the FTE calculation seems a waste to me.
---------------------------------

If we reconsider a different start end time of activity ...eg. 09:00-21:00 HRS, the FTE calculation still gives a weekly FTE 28 & daily FTE 20 ....

however, now the hourly FTE required is 14.17...... and these 20 FTE per day are not enough to maintain a regular coverage of 14.17

Where then lies the practical use of FTE ?

Cheers !

Kex

Strategic Panning Manager

N/a

it makes sense when you use workload
King,

If you ignore workload as you have above, it appears that you would not have sufficient agents, but in Eamon's scenario he assumed that agents would work for 75% of their weekly hours, if you extended the opening hours, but did not assume an increase in work then the 75% may drop to aroun 60%, this would then increase the required staffing levels and therefore increase your FTE.

I haven't done the maths, so the 60% is an estimate

Resource Analyst

ANON VoicebasedServiceCentre

FTE
Hi Scott,

I agree with Eamon's idea of adding occupancy and other factors to evaluate workload.

My intention in excluding it from equation was to keep the focus on my main concern

i.e. the FTE calculated on a weekly level (28) does not help us meet the hourly FTE requirement if the activity timing in the example is 09:00-21:00 (all other workload, etc kept unchanged)

You can do the calculation with or without increase in workload, either ways the issue still persists.

Cheers!

Kex

Strategic Panning Manager

N/a

King

It makes sense what you are saying, but with 10 agents per hour 36 Hrs and 100 calls x 360 AHT, 36 Hrs

You are assuming that 8.5 of your agent/day hours are 100% productive, in effect you have determined the time required to deal with your calls, with all things are equal, calls/hour, AHT/call.

It's a theoretical solution, but one that you would never be able to practically apply

BP&A Intermediate Analyst

Citifinancial

FTE
To my understanding this was it really mean.

FTE = Full Time Employee
PTE = Part Time Employee

Planning Manager

The MDU

FTE
Just to be pedantic:

Its Full time equivalent

for example: 2 part timers doing 4.25 hours would equate to 1 FTE! (Ie the equivalent of 1 full time person)

Planning

Outsourcing

KEX
"Hi Eamon/Dave,

Let's skip the 75-25% work load from the equation (for sake of simplicity!)
---------------------------------
I agree with calculation method :-
Weekly Workload (in secs) = 1700 calls x 7 days x 360 secs AHT = 428400 secs
Weekly Workload (in hrs) = 428400 / 3600 = 1190 hrs
Staffing avbl (in hrs) = 8.5 hrs x 5 working days per week = 42.5 hrs

FTE = 1190 / 42.5 = 28 (per week)
---------------------------------

Similarly, FTE required per day is 20 which will fulfill our hourly FTE requirement of 10 which is constant throughout the week.
---------------------------------

The problem lies in fact that neither have we considered start/end time of activity, nor have we considered shift start/end times. That is where the FTE calculation seems a waste to me.
---------------------------------

If we reconsider a different start end time of activity ...eg. 09:00-21:00 HRS, the FTE calculation still gives a weekly FTE 28 & daily FTE 20 ....

however, now the hourly FTE required is 14.17...... and these 20 FTE per day are not enough to maintain a regular coverage of 14.17

Where then lies the practical use of FTE ?

Cheers !

Kex "

Kex,
FTE is mainly used as a finance metric purely for costing purposes, you will always staff to heads.

Resource Analyst

ANON VoicebasedServiceCentre

FTE
Hi Steve,

That is exactly what i am trying to bring up ===
If FTE figure does not change, regardless of operational hours, we should not be using "FTE" as a finance metric for costing purposes.

In our quest for a definitive figure to arrive at a cost, we consider all possible elements of AHT, SQL target etc but chose to ignore 2 very important elements viz. "Operational hours" & "Shift start/end times".

If operational hours exceed the shift length, the FTE calculated is not enough to have sufficient coverage. If the op hrs are 24hrs with long periods of peak & trough through the day, the FTE figure turns out to be absurd!

Pls comment.

Cheers,
Kex

Planning

Outsourcing

King
Calculate the number of hours that you need to deliver the service, add on any shrinkages then build your shifts,from this you can derive the FTE figure.

FTE is a currency mainly used for finance purposes and helps simplify the costing process.

Resource Analyst

ANON VoicebasedServiceCentre

Hi Steve
Hi Steve,

Thanks for continuing this discussion. I hope to have more people voicing their opinions on this issue.

In most cases FTE calculation is an underestimate of actual resources required (I am talking purely from an inbound Contact Centre perspective with at least 1 or 2 distinct peak periods of business activity).

In such cases, if we use FTE for costing purpose then we will be under-calculating the actual cost of resources..... or more drastic result would be that we never get the actual requirement of resources recruited since the budget has only approved resources based on "FTE" calculation.

Cheers!

Kex

Healthcare Insurance

King
I'm sorry but....

There's only a certain number of ways we can all say it.

A calculator will tell you HOW you need to staff (in hours)

It's up to you to staff to that.

DaveA

Site Operations Manager

Global Connect eSolutions

Hi,

I am new with Workforce planning. We have a new campaign that we'll be starting on Jan 2009. The client gave these figures as part of their requirement:

Number of agents required : 100 (70 voice and 30 non-voice)
Working hours : 12 hrs, 9AM to 9PM EST, Mondays thru Fridays
5 hours, 12PM to 5PM EST, Saturdays and Sundays
Number of calls per agent daily : 200 calls
AHT : 180 seconds

How many agents should we hire for this campaign since it is based on FTE?

What other info do i need to ask the Client about so we can arrive at a good forecast?

Healthcare Insurance

Anna

Whilst I don't mind assisting if someone has a major issue
at this point it would appear you as a senior manager are
just saying, "Tell ma what to do.".

you, or your staff, *SHOULD* be able to do.

As a note the numbers below cannot be correct.

200 calls per agent per day with an AHT of 180
gives 10 hrs Talk time per agent.

Never ever let the client dictate FTE numbers
before you've had chance to look at said numbers.

Regards

DaveA

PayPal

Understanding
Hi Anna

There are lots of terms bandied about in call centres - FTE, agents, AHT's etc and these can all be interpreted in different ways.

Looking at your figures from your client the number of FTE required could be interpreted to two different ways.

"Number of agents required: 100 (70 voice and 30 non-voice)" - if you are handling the entirety of the workload on this campaign (i.e. you are not handling a subset of a larger group of calls) then this could interpreted as the MAXIMUM number of agents required at the busiest part of the day. Broadly speaking then that would equate to 141.7 FTE based on a 37.5 employed week. Assuming a 80% - 20% split of Full-time to part-time resource that would be 167 agents

However, if you interpret it as a flat agent requirement across all the opening hours (e.g. if you are handling calls at the front of the queue and calls overflow to another resource) then the agent requirement is much higher - 255.4 FTE based on a 37.5 hour employed week. Again assuming a 80% - 20% split of Full-time to part-time resource that would be 301 agents

Given a potential difference of over 100 FTE and 130 heads, it is worth asking your client for a clearer definition of the work to be done.

How many calls do you expect the entire operation to handle each week?
Will the operation be solely responsible for handling those calls or do they overflow elsewhere?
Is the agent requirement the maximum required at peak or the minimum required across all the opening hours?
Given the "200" calls per day do you envisage that agents would work 12 hour shifts? (Dave is correct at an AHT of 300 secs that would be 10 hours of handling time per day per agent, given breaks and some downtime the minimum shift would be around 12 hours long)

Hope this helps

Eamon

Satyam BPO Ltd

FTE
Hi Anna,

I agree with the above. Today your client is dictating FTE tommorrow they will be questioning your absence and attrition.

Keeping in mind 180 secs of AHT will take 12 hour shift is an ideal scenario, what about the fact that we will not be able to give that AHT at the onset of the campaign then you will be questioned for abandoned calls and SL.

Hope this helps!!!!

Satyam BPO Ltd

FTE more details
Hi Anna,

Could you please give me the following details so that I can calculate FTE roughly and let you know:
SLA details (SL asa acw etc)

HP

Difference between FTE and CPU
Hi Team,

I would really like to know the difference between FTE and CPU. Which is beneficial to the Company providing services (for ex technical support for ABN) and to the company providing service (ABN).

Sr.Manager -Workforce management

American Express

FTE is for production (hourly line requirement)
HC compises of all buffers including leaves,absenteeism, attrition etc.

From Finance perspective HC is what is supposed to be used.

From SL performance perspective, we should use FTE.

Calculating FTE count based on monthly data for an arrival based process will not be accurate. You would need to calculate hourly requiement and roll it up to daily / weekly / monthly and then add all the buffers to arrive at HC.

Hope this explains.

lnformation Systems Operator

Techspace

Requirement of FTE for Outbound.
FTE stands for Full Time Equivalent.
FTE Requirement for Outbound
Demand of FTE for O/B utterly depends on the subsequent factors:-
1)Number of calls to be created.
2)Average time of O/B call.
3)Right party contact proportion.
4)Required time for handling the call.
Example:-
If you know your total number of labor hours for one year then divide it by 2080 (8hours/day *5days/week*52weeks/year = 2080hours/year)
Suppose your department's total labor hours reported to payroll for Jan - Dec 2014 were 13,104.
Then, 13,104/2080 = 6.3FTEs. br>